Go to homepage
Welcome to S-CONNECT - Components for Solutions

Barix - Annuncicom 60

Paging / Intercom device, mic/speaker support, balanced audio interface PoE
Listprice:

£287.10*

8 pieces available, delivery time: 5 - 7 working days

Icon
Prices for larger quantities please inquire.
Tel: +44 (0) 1276 819333 or e-mail: shop@s-connect.ltd.uk
Manufacturer part number: 2012.9120
Our article number: 180119
Questions? We will be happy to advise you! Contact form
Product information "Barix - Annuncicom 60"
The Annuncicom 60 is a generic IP Audio device designed to serve as a gateway between IP based VoIP, Paging, Intercom systems and traditional systems or call boxes, loudspeakers and microphones.

Based on reliable, embedded, low power, solid state technology, the devices are ideally suited for 24/7 operations, do not need cooling or maintenance, and are not prone to usual issues caused by computer operating systems.

The Annuncicom 60 can be operated with standard IP Audio firmware or a SIP application firmware from Barix. Custom applications can be loaded as well. The Annuncicom 60 allows direct connection of a typical ceiling speaker, an amplifier (balanced interface), microphone or line input and a dry contact. A serial port allows control of RS-232 devices, locally or via the network.

Scope of delivery: BARIX - Annuncicom 60
Audio : En-/Decoder (IP Audio, Intercom/STL)
Features

  • MP3, G711, G.722, PCM Encoding
  • AACplus, MP3, Ogg Vorbis, G.711, G.722, PCM Decoding
  • Shoutcast/Icecast Source capability
  • Audio Level Supervision with SNMP Trap generation
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Microphone Input
  • Line Level Output (balanced)
  • Amplified Output 5W (8Ohm)
  • Contact Closure Input (1)
  • RS-232 Serial Port
  • Power Supply (PoE)
Technical details

Electrical
  • 802.3af PoE on RJ-45 connector
  • 48 VDC nominal, 12 Watt max.
Ethernet
  • 10/100Mbps auto rate, full/half duplex
  • RJ-45 connector with integrated Link/Activity LED
  • 802.3af PoE support
  • Protocols: TCP/IP, UDP, RTP, DHCP, Multicast capable
Audio Input
Characteristics/mode selectable by software:
  • “Mic” mode: 2.9 VDC, bias power for electret microphone supplied
  • “Line” mode: 2kΩ input impedance, 3.9 Vpp max, adjustable in sensitivity
  • Frequency response 25 Hz .. 19 kHz (-3dB)*
  • Dynamic range 85 dB, SNR -85 dB, THD <0.1% (-3 dBFS)*
Mechanical
  • Aluminum case, 280g
  • Dimensions 108 x 38 x 78.7 mm (4.25 x 1.5 x 3.1” inch)
  • rack and wall mountable using optional accessories
MTBF
  • min. 500 000h (according to MIL217F at 25°C)
Analog Line Output (mono)
  • Transformer isolated, balanced (600 Ω)
  • Output level software controllable
  • Full scale output voltage: 5.2 dBu, 4.0 Vpp
  • Frequency response 35 Hz .. 17 kHz (-3dB)*
  • Dynamic range 85 dB, SNR -85 dB, THD <0.5% (-3dBFS)*
Speaker out
  • Suggested speaker impedance 8Ω (min.)
  • 5 Watt max output power @ 8Ω
  • Values @ 8Ω: Frequency response 25 Hz .. 16 kHz (-3dB)*, Dynamic range 87 dB, SNR 87 dB, THD <1% (-3dBFS)*
RS-232 Interface
  • On 9-pin Sub-D connector, male
  • 5-wire (Tx, Rx, RTS, CTS, GND)
  • 300..230‘400 Baud asynchronous, tunneling or local control
Supported Audio formats
  • PCM, G.711, G.722, MP3 encode/decode
  • AAC+ decode
  • PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz
Discrete I/O (Contact Closure Input)
  • 1 discrete / dry contact input