MOXA - ICF-1170I-M-ST
CANbus to fiber converter, multi-mode, ST connector, 0 to 60°C operating temperature
Listprice:
£338.43*
Dealer price - Login
Delivery time: 3 - 4 weeks
Prices for larger quantities please inquire.
Tel: +44 (0) 1276 819333 or e-mail: shop@s-connect.ltd.uk
Tel: +44 (0) 1276 819333 or e-mail: shop@s-connect.ltd.uk
Manufacturer part number:
ICF-1170I-M-ST
Our article number:
11562
Questions? We will be happy to advise you! → Contact form
Product information "MOXA - ICF-1170I-M-ST"
The ICF-1170I Series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical isolation for the CAN bus system and dual power inputs with alarm contact relay to ensure that your CAN bus system will remain online.
Fiber Test Mode
Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and it provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (Tx) will continuously send out a data signal and the Fiber Tx LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (Rx) receives the data signal from the Tx side, the Fiber Rx LED will light up.
Scope of delivery: MOXA - ICF-1170I-M-ST
Fiber Test Mode
Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and it provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (Tx) will continuously send out a data signal and the Fiber Tx LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (Rx) receives the data signal from the Tx side, the Fiber Rx LED will light up.
Scope of delivery: MOXA - ICF-1170I-M-ST
| Connection: | Protocol-Transparent |
|---|---|
| Fieldbus options: | CAN-BUS |
| Isolation: | without isolation |
| Mounting: | DIN-Rail |
| Option: | Copper-to-FiberOptic |
| Power Supply: | External |
| Temperature Range: | 0°C to 60°C |
Features
- Transmits data up to 2 km over optical fiber
- Converts CAN signals to fiber and fiber to CAN signals
- Baudrate up to 1 Mbps
- Dual power inputs for redundancy
- DIP switch for 120 ohm terminal resistance
- DIP switch for fiber test mode
- LEDs for Fiber Tx, Fiber Rx, Power 1, Power 2
- Wide-temperature model available for -40 to 85°C environments
- Fully compatible with the ISO 11898 standard
Technical details
Serial Interface
Optical Fiber: 100BaseFX ports (multi-mode ST connector)
Optical Fiber
CAN Interface
Isolation: 2 kV (built-in)
No. of Ports: 1
Signals: CAN_L, CAN_H, CAN Signal GND
Terminator: N/A, 120 ohms (by DIP)
Power Parameters
Input Current: 221 mA @ 12 to 48 VDC
Power Consumption: 221 mA @ 12 to 48 VDC
Input Voltage: 12 to 48 VDC
No. of Power Inputs: 2
Overload Current Protection: Supported
Power Connector: Terminal block (for DC models)
Physical Characteristics
Housing: Metal
IP Rating: IP30
Dimensions: 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Weight: 178 g (0.39 lb)
Installation: DIN-rail mounting
Environmental Limits
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Serial Interface
Optical Fiber: 100BaseFX ports (multi-mode ST connector)
Optical Fiber
CAN Interface
Isolation: 2 kV (built-in)
No. of Ports: 1
Signals: CAN_L, CAN_H, CAN Signal GND
Terminator: N/A, 120 ohms (by DIP)
Power Parameters
Input Current: 221 mA @ 12 to 48 VDC
Power Consumption: 221 mA @ 12 to 48 VDC
Input Voltage: 12 to 48 VDC
No. of Power Inputs: 2
Overload Current Protection: Supported
Power Connector: Terminal block (for DC models)
Physical Characteristics
Housing: Metal
IP Rating: IP30
Dimensions: 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Weight: 178 g (0.39 lb)
Installation: DIN-rail mounting
Environmental Limits
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)