MOXA - IEX-402-SHDSL
Managed SHDSL Ethernet extender with 1 10/100BaseT(X) port and 1 DSL port, -10 to 60°C operating temperature
Manufacturer part number:
IEX-402-SHDSL
Our article number:
12779
Questions? We will be happy to advise you! → Contact form
Product is End of Life!
New product:
We will find a suitable replacement product for your requirements - please contact our sales department.
Product information "MOXA - IEX-402-SHDSL"
The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km.
The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications.
To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting.
Scope of delivery: MOXA - IEX-402-SHDSL
The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications.
To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting.
Scope of delivery: MOXA - IEX-402-SHDSL
| Connection: | Fast Ethernet |
|---|---|
| Mounting: | DIN-Rail |
| Option: | Copper-to-FiberOptic |
| Power Supply: | External |
| Temperature Range: | -10°C to 60°C |
| Management: | managed |
Features
- Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality)
- Moxa proprietary Turbo Speed connections up to 15.3 Mbps
- Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery
- Supports SNMP v1/v2c/v3 for different levels of network management
- Interoperable with Turbo Ring and Turbo Chain network redundancy
- Support Modbus TCP protocol for device management and monitoring
- Compatible with EtherNet/IP and PROFINET protocols for transparent transmission
- IPv6 Ready
Technical details
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector): 1, Auto negotiation speed, Full/Half duplex mode, Auto MDI/MDI-X connection
Combo Port, RJ-11 (RJ45 connector) or Detachable 2-Contact Terminal Block: 1
Standards: ITU-T G.991.2 for Single-pair high-speed digital subscriber line (G.SHDSL) transceivers
Ethernet Software Features
Management: SNMPv1/v2c/v3, Modbus TCP, Back Pressure Flow Control, DHCP Client, HTTP, LLDP, Syslog, Telnet, TFTP
MIB: MIB-II
Time Management: SNTP
Switch Properties
MAC Table Size: 1 K
Packet Buffer Size: 512 kbits
LED Interface
LED Indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port)
Serial Interface
Console Port: RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)
DIP Switch Configuration
Ethernet Interface: CO/CPE, SNR/SPEED, ANNEX B/ANNEX A, STD/TURBO
Power Parameters
Power Connector: 2 removable 2-contact terminal block(s)
Input Voltage: 12/24/48 VDC, 9.6 to 60 VDC
Input Current: 0.388 A @ 12 VDC, 0.196 A @ 24 VDC, 0.097 A @ 48 VDC
Overload Current Protection: Supported
Reverse Polarity Protection: Supported
Physical Characteristics
Housing: Metal
IP Rating: IP30
Dimensions: 35 x 130 x 105 mm (1.38 x 5.12 x 4.13 in)
Weight: 290 g (0.64 lb)
Installation: DIN-rail mounting, Rack mounting (with optional kit)
Environmental Limits
Altitude: 2000 m
Operating Temperature: -10 to 60°C (14 to 140°F)
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector): 1, Auto negotiation speed, Full/Half duplex mode, Auto MDI/MDI-X connection
Combo Port, RJ-11 (RJ45 connector) or Detachable 2-Contact Terminal Block: 1
Standards: ITU-T G.991.2 for Single-pair high-speed digital subscriber line (G.SHDSL) transceivers
Ethernet Software Features
Management: SNMPv1/v2c/v3, Modbus TCP, Back Pressure Flow Control, DHCP Client, HTTP, LLDP, Syslog, Telnet, TFTP
MIB: MIB-II
Time Management: SNTP
Switch Properties
MAC Table Size: 1 K
Packet Buffer Size: 512 kbits
LED Interface
LED Indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port)
Serial Interface
Console Port: RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)
DIP Switch Configuration
Ethernet Interface: CO/CPE, SNR/SPEED, ANNEX B/ANNEX A, STD/TURBO
Power Parameters
Power Connector: 2 removable 2-contact terminal block(s)
Input Voltage: 12/24/48 VDC, 9.6 to 60 VDC
Input Current: 0.388 A @ 12 VDC, 0.196 A @ 24 VDC, 0.097 A @ 48 VDC
Overload Current Protection: Supported
Reverse Polarity Protection: Supported
Physical Characteristics
Housing: Metal
IP Rating: IP30
Dimensions: 35 x 130 x 105 mm (1.38 x 5.12 x 4.13 in)
Weight: 290 g (0.64 lb)
Installation: DIN-rail mounting, Rack mounting (with optional kit)
Environmental Limits
Altitude: 2000 m
Operating Temperature: -10 to 60°C (14 to 140°F)
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)